Broadata-communications 272E Series Manuel d'utilisateur télécharger pdf (Page 16)

BCI 272E User’s Manual

Digital Fiber Optic Video/Audio/Data Transport System

Broadata Technical Support, [email protected]

The 272E derives power from an external 12VDC power supply. This

power supply is a wall mounted AC/DC adapter, 100-240 VAC, 50-60 Hz,

at 1A. This power supply comes standard for the 272E unless otherwise

specified.

To provide power to the 272E, simply connect the power cord, already

provided with the units, and connect it to the wall jack. (You will find one

power cord per unit). Once the power cord has been connected to the

wall jack, connect 12VDC to the unit and the unit should power up

immediately.

If you have any problems or concerns, regarding the installation, make

sure that you have taken the proper steps to ensure a proper power

connection. Otherwise, feel free to contact us for any questions you

may have.

3.0 OPERATION

After the installation procedure is completed, the units are ready for

operation. To operate the BCI 272E units, simply apply power as

indicated in the previous step. Note that the front panel link status

indicator, shown in Table 2, will be activated.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 25 26

Pas de commentaire

Broadata-communications 272E Series Manuel d'utilisateur Page 16